international organization for standarization network

nternational Organization for Standardization
From Wikipedia, the free encyclopedia
"ISO" redirects here. For other uses, see ISO (disambiguation).



The International Organization for Standardization (Organisation internationale de normalisation), widely known as ISO, is an international standard-setting body composed of representatives from various national standards organizations. Founded on 23 February 1947, the organization promulgates world-wide industrial and commercial standards. It is headquartered in Geneva, Switzerland.[1]

While ISO defines itself as a non-governmental organization, its ability to set standards that often become law, either through treaties or national standards, makes it more powerful than most non-governmental organizations. In practice, ISO acts as a consortium with strong links to governments.[1]Contents [hide]
1 Name and abbreviation
2 International Standards and other publications
3 ISO document copyright
4 Members
5 Products named after ISO
6 ISO/IEC Joint Technical Committee 1
7 IWA document
8 See also
9 References
10 External links


[edit]
Name and abbreviation

The organization's logos in its two official languages, English and French, include the letters ISO, and it is usually referred to by these letters. ISO is not, however, an acronym or initialism for the organization's full name in either official language. Rather, the organization adopted ISO based on the Greek word ἴσος (isos), which means equal. Recognizing that the organization’s initials would be different in different languages, the organization's founders chose ISO as the universal short form of its name. This, in itself, reflects the aim of the organization: to equalize and standardize across cultures.[2][3]

[edit]
International Standards and other publications

ISO's main products are the International Standards. ISO also publishes Technical Reports, Technical Specifications, Publicly Available Specifications, Technical Corrigenda, and Guides.[4]

International Standards are identified in the format ISO[/IEC][/ASTM] [IS] nnnnn[:yyyy] Title, where nnnnn is the number of the standard, yyyy is the year published, and Title describes the subject. IEC is included if the standard results from the work of JTC1 (the Joint Technical Committee). ASTM is used for standards developed in cooperation with ASTM International. The date and IS are not used for an incomplete or unpublished standard, and may under some circumstances be left off the title of a published work.

Technical Reports can be issued when "a technical committee or subcommittee has collected data of a different kind from that which is normally published as an International Standard",[4] such as references and explanations. The naming conventions for these are the same as for standards, except TR prepended instead IS in the report's name. Examples:
ISO/IEC TR 17799:2000 Code of Practice for Information Security Management
ISO/TR 19033:2000 Technical product documentation — Metadata for construction documentation

Technical Specifications can be produced when "the subject in question is still under development or where for any other reason there is the future but not immediate possibility of an agreement to publish an International Standard". Publicly Available Specifications may be "an intermediate specification, published prior to the development of a full International Standard, or, in IEC may be a 'dual logo' publication published in collaboration with an external organization".[4] Both are named by convention similar to Technical Reports, for example:
ISO/TS 16952-1:2006 Technical product documentation — Reference designation system — Part 1: General application rules
ISO/PAS 11154:2006 Road vehicles — Roof load carriers

ISO sometimes issues a Technical Corrigendum. These are amendments to existing standards because of minor technical flaws, usability improvements, or to extend applicability in a limited way. Generally, these are issued with the expectation that the affected standard will be updated or withdrawn at its next scheduled review.[4]

ISO Guides are meta-standards covering "matters related to international standardization".[4] They are named in the format "ISO[/IEC] Guide N:yyyy: Title", for example:
ISO/IEC Guide 2:2004 Standardization and related activities — General vocabulary
ISO/IEC Guide 65:1996 General requirements for bodies operating product certification
See also: List of ISO standards

[edit]
ISO document copyright

ISO documents are copyrighted and ISO charges for copies of most. ISO does not, however, charge for most draft copies of documents in electronic format. Although useful, care must be taken using these drafts as there is the possibility of substantial change before it becomes finalized as a standard. Some standards by ISO and its official U.S. representative (and the International Electrotechnical Commission's via the U.S. National Committee) are made freely available.[5][6]

[edit]
Members
A map of standards bodies who are ISO members
Key:
members
correspondent members
subscriber members
other places with an ISO 3166-1 code who aren't members of ISO

ISO has 157 national members,[7] out of the 195 total countries in the world.

ISO has three membership categories:
Member bodies are national bodies that are considered to be the most representative standards body in each country. These are the only members of ISO that have voting rights.
Correspondent members are countries that do not have their own standards organization. These members are informed about ISO's work, but do not participate in standards promulgation.
Subscriber members are countries with small economies. They pay reduced membership fees, but can follow the development of standards.

Participating members are called "P" members as opposed to observing members which are called "O" members.

[edit]
Products named after ISO

The fact that many of the ISO-created standards are ubiquitous has led, on occasion, to common usage of "ISO" to describe the actual product that conforms to a standard. Some examples of this are:
CD images end in the file extension "ISO" to signify that they are using the ISO 9660 standard filesystem as opposed to another file system - hence CD images are commonly referred to as "ISOs". Virtually all computers with CD-ROM drives can read CDs that use this standard. Some DVD-ROMs also use ISO 9660 filesystems.
Photographic film's sensitivity to light, its "film speed," is described by ISO 5800:1987. Hence, the film's speed is often referred to as its "ISO number."

[edit]
ISO/IEC Joint Technical Committee 1

To deal with the consequences of substantial overlap in areas of standardization and work related to information technology, ISO and IEC formed a Joint Technical Committee known as the ISO/IEC JTC1. It was the first such committee, and to date remains the only one.

Its official mandate is to develop, maintain, promote and facilitate IT standards required by global markets meeting business and user requirements concerning
the design and development of IT systems and tools
the performance and quality of IT products and systems
the security of IT systems and information
the portability of application programs
the interoperability of IT products and systems
the unified tools and environments
the harmonized IT vocabulary, and
the user-friendly and ergonomically-designed user interfaces.

There are currently 18 sub-committees:
SC 02 - Coded Character Sets
SC 06 - Telecommunications and Information Exchange Between Systems
SC 07 - Software and System Engineering
SC 17 - Cards and Personal Identification
SC 22 - Programming Languages, their Environments and Systems Software Interfaces
SC 23 - Removable Digital Storage Media Utilizing Optical and/or Magnetic Recording * Technology for Digital
SC 24 - Computer Graphics and Image Processing
SC 25 - Interconnection of Information Technology Equipment
SC 27 - IT Security Techniques
SC 28 - Office Equipment
SC 29 - Coding of Audio, Picture, and Multimedia and Hypermedia Information
SC 31 - Automatic Identification and Data Capture Techniques
SC 32 - Data Management and Interchange
SC 34 - Document Description and Processing Languages
SC 35 - User Interfaces
SC 36 - Information Technology for Learning, Education, and Training
SC 37 - Biometrics

Membership in ISO/IEC JTC1 is restricted in much the same way as membership in either of the two parent organizations. A member can be either participating (P) or observing (O) and the difference is mainly the ability to vote on proposed standards and other products. There is no requirement for any member body to maintain either (or any) status on all of the sub-committees. Although rare, sub-committees can be created to deal with new situations (SC 37 was approved in 2002) or disbanded if the area of work is no longer relevant.

[edit]
IWA document

Like ISO/TS, International Workshop Agreement (IWA) is another armoury of ISO for providing rapid response to requirements for standardization in areas where the technical structures and expertise are not currently in place. The utility harmonizes technical urgency industrial wide.

[edit]
See also
American National Standards Institute (ANSI)
British Standards
Countries in International Organization for Standardization
European Committee for Standardization (CEN)
International Classification for Standards
International Electrotechnical Commission (IEC) and ISO/IEC standards.
International Telecommunication Union (ITU)
ISO A4
ISO country code
List of ISO standards
Standardization
Standards organization
Terminology planning policy
Bureau of Indian Standards (BIS)
Hygiene Standard Institute (HSI)